NCR RealScan 7875-7000/8000 Installation Guide
AIP-00342 Release B 06/03
31 of 56
Operating the Scale
The RealScan 7875 typically takes from 1.0 to 2.0 seconds to weigh an item, depending on the
item’s weight. The heavier the item, the longer it takes. Before weighing an item, make sure the
scale display is displaying all zeros. If not, press the Scale Zero Button.
Note: The item you are weighing should be placed in the center of the Top Plate. Make sure the
item does not overhang onto the checkstand; whatever is weighed must fit fully on the Top Plate.
If the RealScan 7875 includes the Produce Guard, larger items may rest against it.
When the scale weighs an item, the Status Indicator flashes Green and a good weigh tone is
sounded. Nothing happens if the scale cannot weigh an item.
Status Indicator
Scale Zero Button
Integrated Display
16048
Top Plate
To Next Page
Loading...
