NCR RealScan 7872 - Programming Worksheets

NCR RealScan 7872 Installation/Owner Guide
497-0415291 Release F 08/04 35 of 44
Programming Worksheets
10 Communications Protocol
20552
Protocol
IBM
Slot Scanner
3
IBM
Hand-Held
Bar Code
Reader
4
RS-232
5
IBM 1520
Bar Code
Reader
B
IBM USB
D
NCR
(RS-232)
USB
E 0
11 Good Read Tone
Tone On/Off
A
Off
0
On
Tone
Frequency
(Hertz)
Tone
Volume
Tone
Length
(Milliseconds)
Not-On-File
Tone Volume
When entering Tone Frequency, the adjustment can be
incremented upward by scanning the
Hex B
tag. Each time
you scan the
Hex B
, the tone frequency increases one unit.
Scan the
End
tag or a valid Hex tag to end this mode.
When entering Tone Length, the adjustment can be
incremented upward by scanning the
Hex C
tag. Each time
you scan the
Hex C
tag, the tone length increases one unit.
Scan the
End
tag or a valid Hex tag to end this mode.
When entering Tone Volume, the adjustment can be
incremented upward by scanning the
Hex D
tag. Each time
you scan the
Hex D
tag, the tone length increases one unit.
Scan the
End
tag or a valid Hex tag to end this mode.
When entering Not-On-File Tone Volume, the adjustment can be
incremented upward by scanning the
Hex E
tag. Each time you scan
the
Hex E
tag, the tone length increases one unit.
Scan the
End
tag or a valid Hex tag to end this mode.
B
C
D
C
D
EE
1
B
18299