Need help?Do you have a question about the NCR RealPOS and is the answer not in the manual?
General| Scanning Technology | Laser |
|---|---|
| Interface | RS-232, USB |
| Supported Barcodes | UPC/EAN, Code 39, Code 128, Interleaved 2 of 5, Codabar, MSI, Code 93 |
| Storage Temperature | -40° to 70° C (-40° to 158° F) |
| Humidity | 5% to 95% (non-condensing) |
Explains how to operate the NCR RealPOS Presentation Scanner for barcode reading.
Details the dimensions and weight of the scanner unit.
Describes how the scanner communicates with the user via LED, tones, and voice.
Explains the built-in diagnostic software for identifying scanner issues.
Details how to properly connect the scanner to a power source.
Explains how to change the scanner's default programming settings.
Describes the method of holding the item in front of the scanner for reading.
Discusses factors affecting barcode readability and examples of poor quality labels.
Details how to enter and navigate the scanner's programming states.
Explains how to select the correct communication protocol for the host terminal.
Explains how to interpret scanner status via lights and sounds for problem diagnosis.
Provides instructions for preparing and returning a scanner for service.
Describes how the wedge emulates a PS/2 keyboard for host communication.
Lists programmable functions and scan code translations for the PS/2 wedge.
Provides a visual reference for various scanner programming tags.
Details tests available through the Diagnostic Mode for service technicians.
Procedure to determine the programmed communication protocol of the scanner.
Describes the simple, no-programming mode for Checkpoint system operation.
To Next Page