NCR RealPOS - Programming Speech; Speech Enable;Disable Toggle; Speech in Foreign Languages; Setting Speech to a Foreign Language

Chapter 4: Operating the Scanner 4-9
Programming Speech
Speech on the 7893 is enabled or disabled by scanning the following programming sequence.
Speech Enable/Disable toggle
 Programming Mode
 Hex 3
 Hex 2
 Hex D
 Save and Reset
Scan the programming tag sequence once to enable speech. Scan it a second time to disable
speech.
Speech in Foreign Languages
The language used in the speech function of the 7893 can be toggled between English and
foreign languages (French and Spanish). Scan the following programming tag sequence to
change the language of speech.
Note: The default language for speech is English.
Setting Speech to a Foreign Language
 Programming Mode
 Hex 5
 Hex 6
 Hex 1
 Save and Reset
Setting Speech to English (Default)
 Programming Mode
 Hex 5
 Hex 6
 Hex 0
 Save and Reset