NCR RealPOS User Manual

Chapter 5: Programming 5-71
Code 39 Tone Frequency
27592
Selection
Programming Tag Sequence
Programming Mode, Hex 7, Hex 0, Hex 4, Hex 1,
Save and Reset
3348 Hz
Programming Mode, Hex 7, Hex 0, Hex 4, Hex 0,
Save and Reset
2976 Hz
Programming Mode, Hex 7, Hex 0, Hex 4, Hex 3,
Save and Reset
2679 Hz
Programming Mode, Hex 7, Hex 0, Hex 4, Hex 2,
Save and Reset
2435 Hz
Programming Mode, Hex 7, Hex 0, Hex 4, Hex 5,
Save and Reset
2232 Hz
Programming Mode, Hex 7, Hex 0, Hex 4, Hex 4,
Save and Reset
3906 Hz
Programming Mode, Hex 7, Hex 0, Hex 4, Hex 7,
Save and Reset
3750 Hz Programming Mode, Hex 7, Hex 0, Hex 4, Hex 6,
Save and Reset
3538 Hz
Setting
Default
Code 39 Tone
24388
Selection Programming Tag Sequence
Disable Programming Mode, Hex 7, Hex 0, Hex 5, Hex 0, Save and Reset
Enable Programming Mode, Hex 7, Hex 0, Hex 5, Hex 1, Save and Reset
Code 39 Quiet Zone
24389
Selection Programming Tag Sequence
Disable Programming Mode, Hex 7, Hex 0, Hex 5, Hex 2, Save and Reset
Enable Programming Mode, Hex 7, Hex 0, Hex 5, Hex 3, Save and Reset
Code 39 InterCharacter Gap Check
24390
Selection Programming Tag Sequence
Enable Programming Mode, Hex 7, Hex 0, Hex 5, Hex 5, Save and Reset
Disable Programming Mode, Hex 7, Hex 0, Hex 5, Hex 4, Save and Reset
Code 39 Halves
24451
Selection Programming Tag Sequence
Disable Programming Mode, Hex 7, Hex 0, Hex 9, Hex 0, Save and Reset
Enable Programming Mode, Hex 7, Hex 0, Hex 9, Hex 1, Save and Reset

NCR RealPOS Specifications

General

Scanning Technology	Laser
Interface	RS-232, USB
Supported Barcodes	UPC/EAN, Code 39, Code 128, Interleaved 2 of 5, Codabar, MSI, Code 93
Storage Temperature	-40° to 70° C (-40° to 158° F)
Humidity	5% to 95% (non-condensing)