NCR RealPOS User Manual

5-74 Chapter 5: Programming
Interleaved 2 of 5 CD Length1
24460
Interleaved 2 of 5 CD Length2
24461
Interleaved 2 of 5 Scans Required
25645
Selection Programming Tag Sequence
Programming Mode, Hex 6, Hex B, Hex 5, Hex 3, Save and Reset3 scans
4 scans Programming Mode, Hex 6, Hex B, Hex 5, Hex 4, Save and Reset
1 scan Programming Mode, Hex 6, Hex B, Hex 5, Hex 1, Save and Reset
2 scans Programming Mode, Hex 6, Hex B, Hex 5, Hex 2, Save and Reset
Setting
Default
Note: This is an Advanced Programming Feature and should only be done under
the recommendation and direction of NCR; otherwise, unexpected results
may occur.

NCR RealPOS Specifications

General

Scanning Technology	Laser
Interface	RS-232, USB
Supported Barcodes	UPC/EAN, Code 39, Code 128, Interleaved 2 of 5, Codabar, MSI, Code 93
Storage Temperature	-40° to 70° C (-40° to 158° F)
Humidity	5% to 95% (non-condensing)