NCR RealPOS - GS1 Databar-E AI 93 to Code 39 Tag Data Conversion; GS1 Databar-E AI 94 to UCC-128 Tag Data Conversion; GS1 Databar-E AI 94 to Code-128 Tag Data Conversion; GS1 Databar-E AI 95 to Interleaved 2 of 5 Tag Data Conversion

Chapter 5: Programming 5-77
GS1 DataBar–E AI 93 to Code 39 Tag Data Conversion
24955
Selection Programming Tag Sequence
Programming Mode, Hex 7, Hex 0, Hex A, Hex 3, Save and Reset
Disable Programming Mode, Hex 7, Hex 0, Hex A, Hex 2, Save and Reset
Enable
Setting
Default
GS1 DataBar–E AI 94 to UCC–128 Tag Data Conversion
24956
Selection Programming Tag Sequence
Programming Mode, Hex 7, Hex 0, Hex A, Hex 5, Save and Reset
Disable Programming Mode, Hex 7, Hex 0, Hex A, Hex 4, Save and Reset
Enable
Setting
Default
GS1 DataBar–E AI 94 to Code–128 Tag Data Conversion
24957
Selection Programming Tag Sequence
Programming Mode, Hex 7, Hex 0, Hex A, Hex 7, Save and Reset
Disable Programming Mode, Hex 7, Hex 0, Hex A, Hex 6, Save and Reset
Enable
Setting
Default
GS1 DataBar–E AI 95 to Interleaved 2 of 5 Tag Data Conversion
24958
Selection Programming Tag Sequence
Programming Mode, Hex 7, Hex 0, Hex 9, Hex B, Save and Reset
Disable Programming Mode, Hex 7, Hex 0, Hex 9, Hex A, Save and Reset
Enable
Setting
Default