Need help?Do you have a question about the NCR RealPOS 5953 and is the answer not in the manual?
General| Display Size | 15 inches |
|---|---|
| Resolution | 1024 x 768 |
| Processor | Intel Celeron |
| Storage (HDD) | 80 GB |
| Connectivity | USB, Ethernet, Serial |
| Peripheral Support | barcode scanner |
General overview of the NCR RealPOS 5953 USB DynaKey.
Lists compatible NCR terminals for the DynaKey.
Details various model numbers and their specific configurations.
Outlines the key features of the DynaKey device.
Explains the components and function of the controller board.
Lists the available color schemes for the DynaKey.
Describes how to connect an external keyboard.
Explains the meaning of different LED status indications.
Describes the four functional positions and their uses.
Details the alternate keypad layout for BIOS setup.
Describes the optional Magnetic Stripe Reader (MSR) feature.
Explains the function and programmability of the built-in speaker.
Describes the optional integrated customer display.
Outlines environmental conditions for operation, storage, and transit.
Specifies temperature, humidity, and atmospheric pressure limits.
Details temperature and humidity limits for storing the device.
Specifies temperature and humidity limits for transporting the device.
Lists voltage and current specifications for power connections.
Details typical and maximum power usage figures.
Specifies the maximum recommended cable length.
Warns about proximity to Sensormatic tag detection devices.
Provides physical dimensions for the table-top mount configuration.
Details dimensions and adjustability for checkstand mounting.
Provides general guidelines for mounting the DynaKey.
Specifies optimal viewing height guidelines for the user.
Provides guidelines for optimal reach distance from the checkstand.
Details recommended tilt angles for user viewing comfort.
Specifies recommended swivel angles for positioning the device.
General introduction to installing the DynaKey hardware.
Explains where to find the device's serial number label.
Shows the location of all device's external connectors.
Lists the different mounting configurations available for the DynaKey.
Step-by-step guide for table-top mount installation.
Step-by-step guide for checkstand mount installation.
Describes how to connect the DynaKey to the host terminal.
Provides the necessary steps for powering on the system.
Details the alternate keypad layout used for BIOS setup.
Explains how to exit special mode and return to standard operation.
Guides for touch screen installation and initial calibration.
Step-by-step instructions for installing the touch screen driver software.
Specific steps for performing touch screen calibration.
Describes adjustable features and preferences for the touch screen.
Instructions on how to properly clean the touch screen surface.
Explains the display's automatic blanking function and its control.
Instructions for connecting the device to a standard PC.
Overview of the device's firmware and its core functions.
Details FPGA, key matrix, and sound features.
Describes default settings upon power-up or system reset.
Lists POS-specific extensions and unique features.
Explains HID usages for controlling keyboard programming.
Describes how keylock positions are reported via HID.
Details how to reprogram the keyboard matrix for custom layouts.
Explains the functionality and use of custom keycaps.
Provides the default key mapping table for the device.
Explains how to configure and customize key click sounds.
Lists software utilities provided for configuring the keyboard.
Describes the ActiveX control used for setting device parameters.
Details registry settings for parameterizing the device.
Details registry settings for capturing device data.
Describes the application used for setting key matrices.
Describes the application used for setting key click tones.
Recommends specific video drivers for the 12.1-inch display.
Compares the 5953 USB DynaKey to its predecessor, the 5953-Wedge.
Compares key features of Wedge and USB DynaKey models.
Details the specifications and characteristics of the LCD panel.
Compares the industry-standard DVI interface with the older proprietary interface.
Discusses the availability and implementation of the touch screen interface.
Explains the hot-pluggable nature of the USB DynaKey, allowing replacement without power loss.
Compares communication protocols and software layers of different DynaKey models.
Explains the functionality and use of custom keycaps.
Details the advanced key re-assignment capabilities of the USB DynaKey.
Compares the implementation and detection of the keylock feature across models.
Compares the functionality and programmability of the key click sound.
Compares the error tone generation capabilities between models.
Compares the implementation and USB HID standard conformance of the MSR.
Compares the scanner port implementation and limitations.
Describes the availability of standard self-powered USB ports for expansion.
Discusses the capability to accommodate an optional fingerprint sensor module.
Discusses the capability to accommodate an optional smartcard reader.
Describes a GUI tool for modifying key assignments via the registry.
Lists essential safety precautions to follow before servicing the DynaKey.
Outlines diagnostic steps to identify issues before initiating repair.
Provides solutions for common symptoms and problems encountered with the device.
General introduction to the procedures for disassembling the DynaKey.
Step to disconnect all external cables from the device.
Instructions for removing the table top mounting hardware.
Steps to remove the back cover to access internal components.
Instructions for removing the Magnetic Stripe Reader module.
Lists part numbers for recommended MSR cleaning cards.
Steps to remove the internal speaker unit.
Instructions for removing the touch screen board.
Details how to disconnect cables and remove the main controller board.
Steps to remove the LCD bracket assembly from the unit.
Instructions for replacing the LCD backlight component.
Steps to remove the touch screen assembly from the main cabinet.
Instructions for removing the keypad assembly.
Steps to remove the keylock mechanism.
Instructions for reinstalling the keylock mechanism.
General guidelines for putting the device back together after servicing.
Identifies all connectors present on the controller board.
Provides detailed pin-out information for the DVI connector.
Provides detailed pin-out information for the Powered USB connector.
Provides pin-out information for standard USB connectors.
Describes various cables used for connecting the DynaKey.
General instructions for cleaning the DynaKey keyboard.
Lists approved cleaning agents and solutions for maintenance.
Lists cleaning agents that should not be used as they can cause damage.
Specific instructions for cleaning the glass screen surface.
To Next Page
