NCR RealPOS 5953 - Available Mounting Options; Installing Table Top DynaKey (5964-K030)

Chapter 3: Hardware Installation 3-3
Installing the DynaKey
ThissectiondiscusseshowtoinstalltheDynaKeyhardware
configurations.SeetheterminalHardwareUser’sGuideforspecific
proceduresabouthowtoconnecttheDynaKeytothehostterminal.
Mounting Options
• 5964‐K030StandardRemoteTableTopBase(G11)
• 5964‐K031StandardRemoteTableTopBase(CG1)
• 5953‐K023CheckstandMount
Eachofthemountingoptionsarediscussed,followedbyasection
titledConnectingthe5953DynaKeytotheTerminal,whichdescribesthe
cableconnections.
Installing a Standard Remote Table Top USB DynaKey
(5964-K030)
1. Routethecablesdownthroughmountandoutthebackofthebase.
21140
