NCR RealPOS 5953 - Connecting the DynaKey to a PC

3-20 Chapter 3: Hardware Installation
Connecting the 5953 to a PC
The5953canbeconnectedtoaregularPCusingtheUniversalSwitching 
PowerSupplykit,5953‐K102.ThiskitisusedwhenthePCdoesnot
haveaUSBPlusPowerconnectionbutdoeshaveastandardUSB
TypeAconnectionandaDVIconnection.
• ConnecttheDVIcableto
theDynaKeyDVIandPCconnectors.
• ConnecttheUSBcabletotheDynaKeyPoweredUSBconnectoron
theDynaKeyandtoaUSBportonthePC.
• ConnectthePowerSupplytotheUSBcableandtoanACoutlet
usingastandardpowercord.
21237
Powered USB
USB Port
(PC)
AC Power
Power Supply
USB Cable
DVI
