NCR RealPOS 5953 - Touch Screen Installation and Calibration; Installing the Touch Screen Driver

3-14 Chapter 3: Hardware Installation
Installing and Calibrating the Touch Screen
BesuretoobserveforthefollowingTouchScreencalibration
guidelines:
• Calibratethetouchscreenaspartoftheinstallationprocess.
• Recalibratethetouchscreenwhenthesystemisinstalledatitsfinal
location.
• Recalibratewhenevertheterminalismovedtoanewlocation.
• Recalibratethetouch
screenanytimethesystemhasbeen
disassembledforservicing.
• DownloadtheCalibrationsoftwarefromtheNCRwebsite.
http://www.ncr.com
a. Atthissite,selectSupport→
b. UnderRelatedItems,Services;selectDrivers and Patches→
Retail Support Files→Retail Platform Software→5953.
c. DownloadtheTouchDriver.
Installing the Driver
Note: Ifyouhaveapreviousversionofanothertouchscreendriver
loadedonyoursystem,youmustcompletelyremoveitbefore
continuingwiththisinstallationprocess.
1. ExtracttheHampshiredriverinstallationfilesintotoaworking
directoryonthehostterminal.
2. LocateandruntheTSHARCUSBSetup.exe
program.
3. Welcomescreen>Next
4. LicenseAgreementscreen>Accept,Next