NCR RealPOS 5953 - DynaKey Cleaning Procedures; Approved Cleaners and Solvents

Chapter 6: Hardware Service 6-25
DynaKey Cleaning Procedures
NCRkeyboardsaredesignedforgeneralretailapplications.These
productsareresistanttospillsanddust.However,theseproductsare
notspillproofordustproof.
Tomaintainproperkeyboardoperation,usersshouldpreventwater,
beverages,orcleaningagentsfrombeingintroducedintothekeyboard
duringstorage,operation,orcleaning.
To
cleanyourkeyboard,usethefollowingprocedures:
1. Disconnecttheunitfromthepoweroutletbeforecleaning.
2. Useasoftclothdampenedlightlywithamildnon‐abrasivesoap&
watersolutionor70%IsopropylAlcohol.
3. Gentlywipethesubjectareaclean.
4. Wipethedampareasdry.
Makesuretheglassandtouchscreen
edgesarecompletelydrybeforeusingtheunit.
5. Avoidgettinganyliquidsinsidetheunit.Ifliquiddoesgetinside,
haveaqualifiedservicetechniciancheckitbeforeyoupoweriton
again.
Cleaners/Solvents to Use
Usethefollowingcleaner/solventstocleantheunit.
• MildNon‐AbrasiveSoapandWaterSolution
or
• 70%IsopropylAlcohol