NCR RealPOS 5953 - Servicing the DynaKey Module; Disassembling the DynaKey

Chapter 6: Hardware Service 6-5
Servicing the DynaKey Module
Thissectionprovidesdetailedinstructionsontohowtodisassemble
theDynaKey.
Warning: Onlyproperlytrainedpersonnelusingpropergrounding
proceduresshouldservicetheDynaKey.Personalinjurycouldoccur,
ortheDynaKeymaybedamaged.
Disassembling the DynaKey
1. Disconnecttheexternalcable(s).
19905
DVI
(Video In)
Powered USB
(Data/Power In)
Dual USB
(External)
Single USB
(External)
