EasyManua.ls Logo

NCR RealPOS 70 User Manual

NCR RealPOS 70
306 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
NCRRealPOS70(7402)
Release1.4
UserGuide
B00500001463
IssueN

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the NCR RealPOS 70 and is the answer not in the manual?

NCR RealPOS 70 Specifications

General IconGeneral
Display Size15 inches
RAM4 GB
ConnectivityEthernet, USB
Display TypeLCD
Weight22 lbs (10 kg)

Summary

Chapter 1: Product Overview

Integrated Hardware Features

Lists the various hardware components integrated into the NCR RealPOS 70.

Chapter 2: Installing the Terminal

Installation Restrictions and Guidelines

Lists important guidelines and warnings to follow before installing the terminal.

Out-of-Box Failures Handling

Provides information on what to do in case of defective components found upon initial installation.

Chapter 3: Touch Screen Calibration – Windows (MT 7.12)

Installing the Touch Screen Software

Details the steps for downloading and installing the touch screen software.

Touch Calibration Procedures Overview

Explains the use of TouchWare utilities for calibration procedures.

Touch Screen Calibration Flow Chart

Presents a flowchart illustrating the sequence for touch screen calibration.

3-Point Calibration Procedure

Provides step-by-step instructions for performing a 3-point touch screen calibration.

Linearization Process

Describes the process of linearizing the touch screen for improved accuracy.

Chapter 4: Touch Screen Calibration – Windows (MT 5.64, SR4)

2-Point Calibration Procedure

Details the steps for performing a 2-point touch screen calibration.

Cursor Stabilization Procedure

Explains how to adjust touch screen frequency for steady cursor movement.

25-Point Linearization Procedure

Guides through the 25-point linearization process for touch screen accuracy.

Chapter 5: Touch Screen Calibration – Windows (MT 5.64, SR6)

Installing the Touch Screen Driver

Instructions for manually installing the touch driver if building a custom image.

Touch Calibration Procedures

Lists the procedures available using TouchWare utilities for calibration.

Windows Calibration Flow Chart

Provides a flowchart for the sequence of Windows calibration procedures.

Chapter 6: Touch Screen Calibration – DOS

DOS Calibration Flow Chart

Shows the proper sequence for DOS touch screen calibration procedures.

2-Point Calibration in DOS

Details the steps for performing a 2-point calibration using the Microcal utility.

Chapter 7: Installing a Secondary (Dual) Display

Configuring the Graphics Controller

Explains how to configure the integrated video controller for display modes.

Chapter 8: Installing Peripheral Options

Connecting NCR 5964 Displays

Instructions for connecting the NCR 5964 series touch screen displays.

Cash Drawer Connection

Provides instructions for connecting a cash drawer to the terminal or printer.

Chapter 9: Installing the Terminal in an Integrated Configuration

Integrated Configuration Installation Procedures

Details the steps for mounting the integration tray assembly.

Installing the Transaction Printer

Guides on connecting transaction printers via USB or RS-232 interfaces.

Chapter 10: 2x20 Customer Display Interface

2x20 Customer Display Command Codes

Details the command codes used for controlling the 2x20 customer display.

Chapter 11: APA Customer Display Interface

Chapter 12: Cash Drawer Interface

Chapter 13: Wedge to USB MSR Software Migration

Software Requirements for USB MSR

Lists the necessary software components and configurations for USB MSR support.

Chapter 14: Maintenance

Chapter 15: Operating System Recovery

OS Recovery Procedures

Step-by-step guide for performing an OS recovery using the partition image CD.

Chapter 16: BIOS Updating Procedures

BIOS Updating Steps

Details the steps for performing the actual BIOS update process.

Related product manuals