NCR RealPOS 70 - Chapter 16: BIOS Updating Procedures

Chapter 16: BIOS Updating Procedures
Introduction
ThischapterdiscussesproceduresonhowtoupdatetheterminalBIOS
fromaCD‐ROM.TheEasyPointAdvantagedoesnothaveaninternal
CD‐ROMdrive.Thereforeyoucanuseoneofthefollowing:
• TeacUSBExternalCD‐ROMDrive(2336‐K208)
• NCRServices:ExternalCDR/WDVD‐ROMDrive
(603‐9014774)
• Network(SeetheNCRFitClientSoftwareUserʹsGuide,B005‐0000‐1235.)
Prerequisites
ThefollowingarerequiredtoperformaBIOSupdate.
• BootableUSBCD‐ROMDrive
• USBKeyboard
• BIOSSoftware.DownloadfromtheNCRwebsite:
http://www.ncr.com
a. Atthissite,selecttheSupporttab.
b. SelectDrivers and Patches→Retail Support Files→NCR
RealPOS and SelfServ Terminal and Operating Systems→
NCR RealPOS 70 (7402)→BIOS.
c. Downloadthesoftwaretoyourlocalharddrive.