NCR RealPOS 70 - Wake on LAN

1-28 Chapter 1: Product Overview
Wake on LAN
TheNCRGoldDrivesaresetupforWakeonLAN.TheLANdriverinf
filehasbeenmodifiedsothatevenaftersyspreporresealtheyarestill
WakeonLANcapable.However,therearesomepointstonote
IfyouareusingtheNCRGoldDrive:
• Thedriver
issettoWakeonLANviaMagicPacket(i.e.specific
MACaddress).
• The7402mustnotbepowereddownorshutdown,butratherbe
putintoStandby.
• TheNCRRetailprescribedmethodforwakingaterminalistouse
FitClient.
• Therearethirdpartyor
freewareprogramsthatcansendaMagic
Packet.
IfyouarenotusingtheNCRGoldDrive:
TheLANDriverAdvancedSettingsmustbemodifiedinorderfor
WakeonLANtowork.Therequiredmodificationsare:
1. ExecutetheIntelProsetUtilityfromtheControlPanel.
2. ChoosetheAdvanced
tab.
3. ChoosetheitemEnable PMEandchangethesettingfromNo
ActiontoHardware Default.
4. ChoosetheitemWake On Settingsandchangethesettingfrom
OS ControlledtoWake on Magic Packet.
5. The7402mustnotbepowereddownorshutdown,butratherbe
putintoStandby.
6. TheNCRRetailprescribed
methodforwakingaterminalistouse
FitClient.
7. TherearethirdpartyorfreewareprogramsthatcansendaMagic
Packet.