NCR RealPOS 70 - Powering up the Terminal; Terminal On;Off Switch

Chapter 2: Installing the Terminal 2-11
Powering Up the Terminal
Terminal On/Off Switch
TheTerminalOn/OffSwitchislocatedbehindtheCableCover.There
isaholeintheCableCoverthatyoucaninsertasmallobjecttoaccess
theswitch,oryoucanremovetheCableCovertogainaccesstothe
switch.Thisisalogicswitchonly,whichhastwo
states.
• LastState–theterminalresumesthelastpowerstatewhenpower
isrestored.
• PowerOn–theterminalpowersonwhenpowerisrestored.
20989
Power Switch
