EasyManua.ls Logo

NCR 7772-1316-8801 User Manual

NCR 7772-1316-8801
95 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
User Guide
NCR CX7 All-in-One POS (7772)
BCC5-0000-5363
Issue A

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the NCR 7772-1316-8801 and is the answer not in the manual?

NCR 7772-1316-8801 Specifications

General IconGeneral
BrandNCR
Model7772-1316-8801
CategoryTouch terminals
LanguageEnglish

Summary

Preface

Safety Requirements

Outlines safety precautions and compliance information for the terminal.

Chapter 1: Product Overview

Base Models

Lists the different base models available for the NCR CX7 POS terminal.

Features

Details various features and their associated part numbers for the NCR CX7.

Operating Systems

Lists supported operating systems and their product IDs for the NCR CX7.

Specifications

Provides detailed technical specifications for different configurations of the NCR CX7.

Chapter 2: Hardware Installation

Installation Restrictions

Outlines mandatory restrictions and warnings for installing the NCR CX7 terminal.

Chapter 4: Disk Image Backup and Recovery Tool

Saving an Image

Describes the process of saving a disk image from the NCR CX7.

Loading an Image

Details the procedure for loading a disk image onto the NCR CX7.

Chapter 5: Configuring a Second SSD for RAID

Configuring a RAID System

Step-by-step guide to install and configure a RAID system using Intel Rapid Storage Technology.

Chapter 7: BIOS Setup

BIOS Setup Navigation and Defaults

Covers entering BIOS, selecting options, restoring factory settings, and default settings.

Chapter 8: BIOS Updating Procedure

Updating BIOS via USB Flash Key

Step-by-step guide to update the NCR CX7 BIOS using a bootable USB flash drive.

Updating BIOS via Windows Executable

Instructions for updating the NCR CX7 BIOS using a Windows Flash Executable.

Chapter 9: Initial Terminal Imaging

Imaging Procedure

Describes how to apply or restore a factory default image on the NCR CX7 terminal.

Related product manuals