Need help?Do you have a question about the NCR 7772-1216-8801 and is the answer not in the manual?
General| Product Type | Touch terminal |
|---|---|
| Model | NCR 7772-1216-8801 |
| Resolution | 1024 x 768 |
| RAM | 4GB |
| Operating System | Windows 10 |
| Connectivity | Ethernet, USB |
Covers essential safety, battery, power, and peripheral usage instructions.
Provides detailed technical specifications for the NCR CX7 POS terminal.
Describes the various input/output ports on the terminal's base units.
Details the pin assignments for various I/O connectors on the terminal.
Explains how to connect the terminal to a power source.
Steps for initial power-on and system setup of the terminal.
Step-by-step guide on how to launch the disk image recovery tool.
Explains how to save or load system images using the recovery tool.
Detailed steps for creating and saving a system image.
Detailed steps for restoring a system image onto the terminal.
Step-by-step guide to setting up a RAID volume using Intel Rapid Storage Technology.
Procedure to configure the system to wake up remotely over the network.
Steps to reset BIOS settings to their default factory configuration.
Provides methods for updating the BIOS via USB or Windows executable.
Detailed steps for creating and using a bootable USB drive for BIOS updates.
Instructions for updating the BIOS using a Windows-based executable.
To Next Page
