Need help?Do you have a question about the NCR CX3 POS and is the answer not in the manual?
General| Brand | NCR |
|---|---|
| Model | CX3 POS |
| Category | Touch terminals |
| Language | English |
Identifies the intended readers of the user guide.
Lists the different base models of the NCR CX3 POS system.
Details additional features available for the NCR CX3 POS.
Explains how to mount the terminal using the F170 stand.
Details mounting the terminal on a wall or VESA mount.
Details the pinout and LED indicators for the LAN port.
Explains the pinout for USB 3.0 ports and power capabilities.
Locates and describes the terminal's power switch.
Explains the functions and colors of the power status LED.
Lists essential guidelines and warnings for installing the terminal.
Details the serial connection method for installing a transaction printer.
Explains how to log in with administrator rights for software installation.
Introduces the PCAP touchscreen and its usage.
Provides instructions on how to use the Magnetic Stripe Reader.
Offers advice on handling and caring for cards.
Specifies the acceptable thickness range for cards.
Guides users on how to properly use the biometrics reader.
Provides instructions for cleaning the biometric sensor.
Details the steps for cleaning the terminal cabinet.
Introduces the procedures for backing up and recovering the POS image.
Explains how to start the NCR Image Recovery Tool.
Details the size limitations and usage of the recovery partition.
Describes the use of Site Image for initial setup or updates.
Explains User Image for routine day-to-day backups.
Guides on how to enter the BIOS setup utility.
Explains keyboard controls for navigating BIOS menus.
Details how to reset BIOS to factory default settings.
Introduces procedures for updating the terminal's SPI and BIOS.
Lists requirements for updating BIOS via USB flash key.
Lists requirements for updating BIOS using Windows executable.
Step-by-step guide to updating BIOS using a bootable USB drive.
Explains how to apply/restore images using bootable USB media.
Provides step-by-step instructions for imaging the terminal.
Lists the software packages needed for APA Graphical Display.
To Next Page
