Need help?Do you have a question about the NCR POS XR8 and is the answer not in the manual?
General| Brand | NCR |
|---|---|
| Model | POS XR8 |
| Category | Touch terminals |
| Language | English |
This book is written for hardware installer/service personnel, system integrators, and field engineers.
Covers safety requirements, grounding instructions, power systems, and peripheral usage.
Details motherboard connectors and specific ports for Release 1.x and 2.x.
Details connectors for Release 3.x (XR8c) and optional Daughter Card.
Describes additional I/O connections available on the terminal.
Explains the function of front panel LEDs as diagnostic indicators for system status.
Steps to access, navigate, and restore factory settings in the BIOS Setup utility.
Lists default BIOS settings and options for the BIOS Main Menu.
Configuration options in the BIOS Advanced Menu for system settings.
Covers BIOS security settings and boot menu configurations.
BIOS settings for system agent, graphics, LCD control, and memory.
Lists requirements and methods for performing SPI/BIOS updates.
Steps to create a bootable USB memory drive for SPI/BIOS updates.
Overview of SPI/BIOS update procedures, including automatic, interactive, and DMI prompt options.
Steps to configure the Intel® Active Management Technology (AMT) on the terminal.
Steps to enable Intel AMT and the BIOS Hotkey Pressed feature in the BIOS.
Discusses RAID systems and installation procedures using Intel® Rapid Storage Technology.
Step-by-step guide for installing and configuring RAID volumes on the terminal.
Instructions for safely cleaning the terminal's cabinet and touch screen.
Covers installation precautions and connecting NCR displays to the POS XR8.
Details installing various printers using 24V USB or RS232 cables.
Guidance on connecting various NCR cash drawers to the terminal.
Explains connecting USB and PS/2 keyboards and USB mice to the POS XR8.
Procedure for replacing SSD or HDD in Release 1.x/2.x and Release 3.x models.
Steps to apply or restore an OS image to the terminal using USB flash media.
Covers the tool's introduction, starting, main screen, and saving/loading images.
Functions to change network settings, password, recovery image, or language.
Information on creating disk images using NCR tools for the terminal's recovery feature.
To Next Page
