NCR CX3 POS - CX Display Touch Tool

Confidential and proprietary information of NCR.
Unauthorized use, reproduction and/or distribution is strictly prohibited.
78
CX Display Touch Tool
In CX terminals with multiple touch displays, Windows may have difficulty
assigning the touch devices to the correct display. The CX Display Touch Tool is
used to assign the touch device to its correct display. The tool sets the Windows
display to Extended Desktop and assigns detected touch interfaces to the
corresponding display.
The tool supports the following CX terminals:
l
NCRCX3 POS(7776)
l
NCRCX5 POS (7773)
l
NCRCX7 POS(7772)
The tool is located in the following
location:https://www5.ncr.com//support/support_drivers_
patches.asp?Class=External/CXDisplay%5CTouch%5CTool%5CDisplay
Refer to the Readme document for the installation procedure.