Confidential and proprietary information of NCR.
Unauthorized use, reproduction and/or distribution is strictly prohibited.
59
BIOS Setup
Entering Setup
1. Connect an alphanumeric USB keyboard to the terminal.
2. Apply power to the terminal.
3. When you see the NCR logo displayed, press Del or F2.
Selecting Menu Options
The following keyboard controls are used to select the various menu options and
to make changes to their values.
Keyboard Control Action
Arrow Keys Select (highlight) options and menu screens
Enter Select a submenu
+ / - Change field values
F1 View help information on the possible selections for the highlighted item
To save the changes, move the cursor to the Save and Exit Menu, select Save
Changes & Reset, and press Enter.
Restoring Factory Settings
To reset all values to their default settings, follow these steps:
1. Press F3.
2. When the confirmation message is displayed, press Enter. The terminal
automatically loads the BIOS default values.
3. Go to the Save and Exit Menu.
4. Select Save Changes & Reset.
5. Press Enter.
To Next Page
Loading...
Need help?
General
