Confidential and proprietary information of NCR.
Unauthorized use, reproduction and/or distribution is strictly prohibited.
20
Connecting to a Network
Most business configurations require the terminal to connect to a network.
Connecting to a network enables communicating with other systems and devices
also on the network. Depending on business configurations, connecting to a
network may allow connection to the Internet.
1. Connect the 10/100/1000 Ethernet cable to the LAN connector of the CX3.
2. Connect the other end of the 10/100/1000 Ethernet cable to a network hub.
Note
Consult with your business Information Technology (IT) representative to
determine the available connection and to locate the network hub.
To Next Page
Loading...
Need help?
General
