NCR CX3 POS User Manual

Confidential and proprietary information of NCR.
Unauthorized use, reproduction and/or distribution is strictly prohibited.
19
Connecting ACPower
Caution
Do not connect or disconnect the Power Cable from the terminal
with the AC Power Cord connected to an AC outlet. It is
recommended to disconnect the AC Power Cord from the AC outlet and
wait 30seconds before connecting or disconnecting the Power Supply
cable from the terminal.
The CX3 receives power from an external 24V power brick.
Caution
The CX3 requires the NCR 24V power supply that is shipped with the
terminal. Use of other power bricks may cause damage to the unit.
1. Connect the Power Supply cable to the Power In connector on the terminal.
Important
Ensure that the side of the cable overmold that shows an arrow is
facing down.
2. Connect the AC Power Cord to the Power Supply and to an AC outlet.

NCR CX3 POS Specifications

General

Brand	NCR
Model	CX3 POS
Category	Touch terminals
Language	English