NCR CX3 POS User Manual

Confidential and proprietary information of NCR.
Unauthorized use, reproduction and/or distribution is strictly prohibited.
18
Installing the Terminal
This chapter explains how to perform an "Out-of-box" installation of a CX3
configured with the standard Table-Top Stand and how to connect optional
peripheral devices. The standard items included in the box are:
l
CX3 POS
l
Power Supply
l
Power Cord
The CX3 comes fully assembled and is ready for use. All that is required to install
are the AC Power Cord, LAN Cable, and peripheral device cables.
For more information about the CX3 I/O ports, refer to I/O Ports on page8.
Note
The POS LCD has a protective film. After removing the film, the LCD
should be cleaned. For more information, refer to Cleaning the
Touchscreen on page29.

NCR CX3 POS Specifications

General

Brand	NCR
Model	CX3 POS
Category	Touch terminals
Language	English