NCR RealPOS 5953 - Checkstand Mount Dimensions

2-4 Chapter 2: Site Preparation
5953-K023 Checkstand Mount
TheCheckstandMountisfullyadjustablebetweentheminimumand
maximumdimensionsthatareillustratedbelow.TheDynaKeycan
alsoberotatedrightandleftofcenter(shown)byapproximately90
degrees,aswellastiltedfromaverticalpositiontoapproximately45
degrees(shown).
19909
213 mm
(8.4 in.)
216 mm
(8.5 in.)
400 mm
(15.75 in.)
330 mm
(13.0 in.)
370 mm
(14.5 in.)
480 mm
(19.0 in.)
38 mm
1.5 in.
7.6.mm
0.30 in.
70 mm
2.75 in.
89 mm
3.5 in.
114 mm
4.25 in.
