Need help?Do you have a question about the NCR RealPOS X Series and is the answer not in the manual?
General| Input Voltage | 12V DC |
|---|---|
| Touch Technology | Projected Capacitive |
| Power Consumption | 15 W |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 60°C |
| Mounting | VESA 75 x 75 mm |
| Interface | USB |
Identifies the target readers for this manual.
Key safety precautions, warnings, and cautions for installation and operation.
General introduction to the NCR RealPOS X-Series Displays.
Lists specific product models, their configurations, and available sizes.
Details the common and optional features of the displays.
Lists compatible host terminals and supported display resolutions.
Describes integrated accessories like biometrics/MSR, and various mounting options.
Guidelines and restrictions before installing the display.
Recommendations for optimal display placement and viewing conditions.
Overview of display mounting options and initial setup.
Instructions for connecting various display cables (USB, DisplayPort, HDMI, DVI, VGA) and power.
Methods for organizing and securing cables for strain relief.
Describes the two types of touch screens and their basic operation.
Details the usage, care of cards, and specifications of the MSR.
Instructions for using and cleaning the biometric reader.
Safe methods for cleaning the display unit's exterior.
Overview of the OSD utility and its adjustable display parameters.
Steps to download and install the NCR Software OSD utility.
Guide to using the graphical interface for display adjustments.
Instructions for using the command-line version of the OSD utility.
Guidelines for accurate touch screen calibration.
Step-by-step process for calibrating resistive touch screens.
Procedure for calibrating PCap touch screens if necessary.
To Next Page
