NCR RealPOS X Series - X-Series Display Extension Arm Mount (7702-K453, for 10.4 and 15 Displays Only); Pole Mount (for 5985 10.4 Display Only); Head for 10.4 Non-Touch Display (5985-F300)

Product Overview 1-11
X-Series Display Extension Arm Mount (7702-K453, For 10.4" and 15"
Displays Only)
This mount (7702-K453) is used to add an X-Series Display as a second display on an
XRSeries Stand (7702-K031). The second display is mounted on an Extension Arm
connected to the bottom of the Stand. The XRSeries Stand and the interface cables to
the host terminal are not included and must be ordered separately.
Pole Mount (For 5985 10.4" Display Only)
12" Pole and Table Top Mount (5934-K020) and Pole Mount Head
for 10.4" Non-Touch Display (5985-F300)
Must order both 5934-K020 and 5985-F300.