Need help?Do you have a question about the NCR 5964 and is the answer not in the manual?
Device power source and fuse replacement safety guidelines.
Details the 12.1-inch TFT LCD Touch Screen, enclosure, backlight switch, PS/2 interface, wedge controller, speaker, cables, and mount options.
Details operating, storage, and transit environmental ranges (temperature, humidity, pressure).
Specifies voltage, tolerance, and current requirements for the LCD and external keyboard/scanner.
Outlines the steps for installing the 5964, including serial number, connectors, cable routing, and mounting.
Describes the procedure for powering up the workstation and initial checkout after hardware installation.
Provides guidelines and steps for calibrating the touch screen using MicroTouch in Windows.
Details the process for calibrating the touch screen using Microcal in a DOS environment, including Noise Check.
Lists troubleshooting steps for touch screen calibration issues, including recalibration and board replacement.
Explains the touch screen interface via RS232 and the use of bar code labels for calibration data.
Details safety precautions and warnings for servicing the touch screen, including grounding and power disconnection.
Provides a troubleshooting table with common symptoms, probable causes, and solutions for the 5964.
Provides detailed instructions on how to completely disassemble the NCR 5964 LCD Display.
Explains how to disassemble the 5964 LCD Display for servicing, starting with removing the back cover.
Details the steps to disconnect cables and remove screws to take out the touch controller board.
Provides instructions on removing the LCD assembly, including loosening and removing screws securing the bracket.
To Next Page
General
