NCR 5964 - Calibrating the Touch Screen

Chapter 3: Installation 3-11
Calibrating the Touch Screen
Be sure to observe for the following Touch Screen calibration
guidelines:
• Calibrate the touch screen as part of the installation process.
• Recalibrate the touch screen when the system is installed at its final
location.
• Recalibrate whenever the terminal is moved to a new location.
• Recalibrate the touch screen anytime the system has been
disassembled for servicing.
• The Touch Screen can be calibrated using MicroTouch (Windows)
or Microcal (DOS).
Calibration Using MicroTouch (Windows)
1. From the Windows Start button, select Settings→Control
Panel→MicroTouch Touchscreen.
2. From the MicroTouch Touchscreen Properties screen, select Calibrate
to begin calibration.