Chapter 5: Service and Repair
Safety Requirements
Carefully follow these safety requirements before servicing the Touch
Screen.
Warning: The 5964 Touch LCD contains hazardous voltages and
should only serviced by qualified service personnel.
Warning: Before servicing the equipment plug your safety strap
into a proper grounding outlet. Failure to do so could damage the
equipment.
Caution: Before servicing the 5964 Touch LCD, power down the
terminal or PC and disconnect the terminal AC power cord.
Disconnect the cables from the PC or workstation to the Touch Screen.
Caution: To protect the internal circuitry from damage, unplug the
AC power cord and then momentarily press the power switch ON to
drain the power supply capacitance.
Caution: The power supply cord is used as the main disconnect
device. Ensure that the socket outlet is located/installed near the
equipment and is easily accessible.
Attention: Le cordon d’alimentation est utilisé comme interrupteur
général. La prise de courant doit être située ou installée a proximite du
matériel et être facile d’accés.
To Next Page
Loading...
