Chapter 2: Site Preparation 2-5
12.1-inch LCD Display
LCD Panel
The 12.1-inch LCD panel is mounted behind the front plastic bezel of
the enclosure. At least one TFT (active matrix) is supported.
Only 3.3-volt LCD panels are supported. A field replaceable fuse for
safety protects power to the panel. It also is used to protect the system
against damage in the event of a fault in the LCD panel.
LCD Adapter Board
The 7452/7453-4000 uses four signals, called the Panel ID bits to
identify the panel being used. These parameters are provided in the
LCD harness.
The Panel ID values are defined as:
ID
Value
Panel Type ID
Value
Panel Type
0 DSTN-Sharp LM80C312 8 TFT – Samsung LTM1201SI-
T01
1 DSTN Sharp LM12S49 9 TFT Type 2 (Reserved)
2 DSTN Type 3 (Reserved) 10 TFT Type 3 (Reserved)
3 DSTN Type 4 (Reserved) 11 TFT Type 4 (Reserved)
4 DSTN Type 5 (Reserved) 12 TFT Type 5 (Reserved)
5 DSTN Type 6 (Reserved) 13 TFT Type 6 (Reserved)
6 DSTN Type 7 (Reserved) 14 TFT Type 7 (Reserved)
7 DSTN Type 8 (Reserved) 15 TFT Type 8 (Reserved)
Any LCD panels that have identical electrical and timing requirements
to those listed may also use the same ID value.
To Next Page
Loading...
