NCR RealPOS X Series - Running the Utility (GUI Version)

NCR Software OSD Utility 4-43
Running the Utility (GUI Version)
1. Unzip the application to a folder of your choice on the target system.
2. In the unzipped folder, navigate to the OSD executable.
Example: (32-Bit version)
NCR_Software_OSD_GUI_x86_V2.1.6.3>> x86
3.
Execute the NCR_Software_OSD_GUI_x86.exe file to start the application.
4.
Answer Yes at the Security warning.
Main Menu
Monitors Detected Panel
This panel lists all the monitors connected to the system. If more than one monitor is
connected, the first monitor is selected by default.
Center Panel
The Center Panel displays information pertaining the selected control.