4-44 NCR Software OSD Utility
Control Buttons
The Control Buttons show the available features that can be modified. Unavailable
features are grayed out.
Refresh Button
Refreshes data in the Monitors Detected panel (OSD does not auto detect). Use this
button after connecting a new monitor to refresh the data.
About Button
Displays a brief description of the utility.
Help Button
Opens the Help File.
Close Button
Closes the OSD application.
Information
Provides information about the selected monitor. Information includes:
• Device manufacturer
• Date manufactured
• EDID version
• Input type
• Dimensions
• Monitor name
• Monitor serial number
• Preferred timing
• Controller type
• Firmware level
• Firmware version (for Dynamo display only)
• Display mode (for Dynamo display only)
• Timing Report
• Horizontal frequency
• Vertical frequency
• Timing status
• Raw EDID
• Raw capabilities string (CAPS)
To Next Page
Loading...
