2-24 Hardware Installation
VGA Cable
For host terminals that only have VGAfor video, a VGA Cable can be used to provide
video to the display. A separate Audio Cable is required for audio.
1. Connect the VGA Cable to the VGA connectors on both the display and host
terminal.
2. Optional: Connect an Audio Cable to the Audio connectors on both the display and
host terminal.
Note: The display has an internal audio amplifier. In order to obtain high quality
speaker output the connection from the host terminal should be driven with a Line
level signal and NOT by an Amplified or Speaker level signal. If an Amplified or Speaker
level signal is the only connection option, the volume on the terminal should be
reduced to eliminate audio distortion.
To Next Page
Loading...
