NCR RealPOS User Manual

5-82 Chapter 5: Programming
Number of Minimum Code 39 Characters in Code 39 Partial
Selection Programming Tag Sequence
Programming Mode, Hex 6, Hex B, Hex C, Hex 4, Save and Reset4 characters
5 characters Programming Mode, Hex 6, Hex B, Hex C, Hex 5, Save and Reset
2 characters Programming Mode, Hex 6, Hex B, Hex C, Hex 2, Save and Reset
3 characters Programming Mode, Hex 6, Hex B, Hex C, Hex 3, Save and Reset
Programming Mode, Hex 6, Hex B, Hex C, Hex 6, Save and Reset6 characters
7 characters Programming Mode, Hex 6, Hex B, Hex C, Hex 7, Save and Reset
24531
Programming Mode, Hex 6, Hex B, Hex C, Hex 8, Save and Reset8 characters
9 characters Programming Mode, Hex 6, Hex B, Hex C, Hex 9, Save and Reset
Number of Code 128 Overlaps Required
24532
Selection Programming Tag Sequence
Programming Mode, Hex 6, Hex B, Hex D, Hex 3, Save and Reset3 overlaps
4 overlaps Programming Mode, Hex 6, Hex B, Hex D, Hex 4, Save and Reset
1 overlap Programming Mode, Hex 6, Hex B, Hex D, Hex 1, Save and Reset
2 overlaps Programming Mode, Hex 6, Hex B, Hex D, Hex 2, Save and Reset
Number of Minimum Interleaved 2 of 5 Characters in Interleaved 2 of 5 Partial
Selection Programming Tag Sequence
Programming Mode, Hex 6, Hex B, Hex E, Hex 4, Save and Reset4 characters
5 characters Programming Mode, Hex 6, Hex B, Hex E, Hex 5, Save and Reset
2 characters Programming Mode, Hex 6, Hex B, Hex E, Hex 2, Save and Reset
3 characters Programming Mode, Hex 6, Hex B, Hex E, Hex 3, Save and Reset
Programming Mode, Hex 6, Hex B, Hex E, Hex 6, Save and Reset6 characters
7 characters Programming Mode, Hex 6, Hex B, Hex E, Hex 7, Save and Reset
24533
Programming Mode, Hex 6, Hex B, Hex E, Hex 8, Save and Reset8 characters
9 characters Programming Mode, Hex 6, Hex B, Hex E, Hex 9, Save and Reset
Number of Minimum Code 128 Characters in Code 128 Partial
Selection Programming Tag Sequence
Setting
Programming Mode, Hex 6, Hex B, Hex F, Hex 4, Save and Reset4 characters
5 characters Programming Mode, Hex 6, Hex B, Hex F, Hex 5, Save and Reset
Programming Mode, Hex 6, Hex B, Hex F, Hex 6, Save and Reset6 characters
7 characters Programming Mode, Hex 6, Hex B, Hex F, Hex 7, Save and Reset
24534
Programming Mode, Hex 6, Hex B, Hex F, Hex 8, Save and Reset8 characters
9 characters Programming Mode, Hex 6, Hex B, Hex F, Hex 9, Save and Reset

NCR RealPOS Specifications

General

Scanning Technology	Laser
Interface	RS-232, USB
Supported Barcodes	UPC/EAN, Code 39, Code 128, Interleaved 2 of 5, Codabar, MSI, Code 93
Storage Temperature	-40° to 70° C (-40° to 158° F)
Humidity	5% to 95% (non-condensing)