NCR RealPOS User Manual

5-76 Chapter 5: Programming
GS1 DataBar Tone Length
24961
Selection Programming Tag Sequence
Programming Mode, Hex 7, Hex 4, Hex 0, Hex 1, Save and Reset
0 ms Programming Mode, Hex 7, Hex 4, Hex 0, Hex 0, Save and Reset
15 ms
Programming Mode, Hex 7, Hex 4, Hex 0, Hex 3, Save and Reset
30 ms Programming Mode, Hex 7, Hex 4, Hex 0, Hex 2, Save and Reset
45 ms
Programming Mode, Hex 7, Hex 4, Hex 0, Hex 5, Save and Reset
60 ms Programming Mode, Hex 7, Hex 4, Hex 0, Hex 4, Save and Reset
75 ms
Programming Mode, Hex 7, Hex 4, Hex 0, Hex 7, Save and Reset
90 ms Programming Mode, Hex 7, Hex 4, Hex 0, Hex 6, Save and Reset
105 ms
Programming Mode, Hex 7, Hex 4, Hex 0, Hex 9, Save and Reset
120 ms Programming Mode, Hex 7, Hex 4, Hex 0, Hex 8, Save and Reset
135 ms
Programming Mode, Hex 7, Hex 4, Hex 0, Hex B, Save and Reset
150 ms Programming Mode, Hex 7, Hex 4, Hex 0, Hex A, Save and Reset
165 ms
Programming Mode, Hex 7, Hex 4, Hex 0, Hex D, Save and Reset
180 ms Programming Mode, Hex 7, Hex 4, Hex 0, Hex C, Save and Reset
195 ms
Programming Mode, Hex 7, Hex 4, Hex 0, Hex F, Save and Reset
210 ms Programming Mode, Hex 7, Hex 4, Hex 0, Hex E, Save and Reset
225 ms
Setting
Default
GS1 DataBar Tone Frequency
27593
Selection
Programming Tag Sequence
Programming Mode, Hex 7, Hex 4, Hex 1, Hex 1,
Save and Reset
3348 Hz
Programming Mode, Hex 7, Hex 4, Hex 1, Hex 0,
Save and Reset
2976 Hz
Programming Mode, Hex 7, Hex 4, Hex 1, Hex 3,
Save and Reset
2679 Hz Programming Mode, Hex 7, Hex 4, Hex 1, Hex 2, Save and Reset
2435 Hz
Programming Mode, Hex 7, Hex 4, Hex 1, Hex 5,
Save and Reset
2232 Hz
Programming Mode, Hex 7, Hex 4, Hex 1, Hex 4,
Save and Reset
3906 Hz
Programming Mode, Hex 7, Hex 4, Hex 1, Hex 7,
Save and Reset
3750 Hz Programming Mode, Hex 7, Hex 4, Hex 1, Hex 6,
Save and Reset
3538 Hz
Setting
Default
GS1 DataBar Tone
24963
Selection Programming Tag Sequence
Programming Mode, Hex 7, Hex 4, Hex 2, Hex 1, Save and Reset
Disable Programming Mode, Hex 7, Hex 4, Hex 2, Hex 0, Save and Reset
Enable
Setting
Default

NCR RealPOS Specifications

General

Scanning Technology	Laser
Interface	RS-232, USB
Supported Barcodes	UPC/EAN, Code 39, Code 128, Interleaved 2 of 5, Codabar, MSI, Code 93
Storage Temperature	-40° to 70° C (-40° to 158° F)
Humidity	5% to 95% (non-condensing)