NCR RealPOS User Manual

Chapter 5: Programming 5-81
Number of UPC/EAN Scans Required
24463
Selection Programming Tag Sequence
Programming Mode, Hex 6, Hex B, Hex 3, Hex 3, Save and Reset3 scans
4 scans Programming Mode, Hex 6, Hex B, Hex 3, Hex 4, Save and Reset
1 scan Programming Mode, Hex 6, Hex B, Hex 3, Hex 1, Save and Reset
2 scans Programming Mode, Hex 6, Hex B, Hex 3, Hex 2, Save and Reset
Number of Code 39 Scans Required
24464
Selection Programming Tag Sequence
Programming Mode, Hex 6, Hex B, Hex 4, Hex 3, Save and Reset3 scans
4 scans Programming Mode, Hex 6, Hex B, Hex 4, Hex 4, Save and Reset
1 scan Programming Mode, Hex 6, Hex B, Hex 4, Hex 1, Save and Reset
2 scans Programming Mode, Hex 6, Hex B, Hex 4, Hex 2, Save and Reset
Number of Code 128 Scans Required
24466
Selection Programming Tag Sequence
Programming Mode, Hex 6, Hex B, Hex 7, Hex 3, Save and Reset3 scans
4 scans Programming Mode, Hex 6, Hex B, Hex 7, Hex 4, Save and Reset
1 scan Programming Mode, Hex 6, Hex B, Hex 7, Hex 1, Save and Reset
2 scans Programming Mode, Hex 6, Hex B, Hex 7, Hex 2, Save and Reset
Number of Code 39 Overlaps Required
24529
Selection Programming Tag Sequence
Programming Mode, Hex 6, Hex B, Hex 9, Hex 3, Save and Reset3 overlaps
4 overlaps Programming Mode, Hex 6, Hex B, Hex 9, Hex 4, Save and Reset
1 overlap Programming Mode, Hex 6, Hex B, Hex 9, Hex 1, Save and Reset
2 overlaps Programming Mode, Hex 6, Hex B, Hex 9, Hex 2, Save and Reset

NCR RealPOS Specifications

General

Scanning Technology	Laser
Interface	RS-232, USB
Supported Barcodes	UPC/EAN, Code 39, Code 128, Interleaved 2 of 5, Codabar, MSI, Code 93
Storage Temperature	-40° to 70° C (-40° to 158° F)
Humidity	5% to 95% (non-condensing)