NCR RealPOS User Manual

5-80 Chapter 5: Programming
Codabar Hard Correlation
25323
Selection Programming Tag Sequence
Programming Mode, Hex 6, Hex B, Hex 2, Hex 7, Save and Reset
Disable Programming Mode, Hex 6, Hex B, Hex 2, Hex 6, Save and Reset
Enable
Setting
Default
Number of Codabar Overlaps Required
25580
Selection Programming Tag Sequence
Programming Mode, Hex 6, Hex B, Hex A, Hex 3, Save and Reset3 overlaps
4 overlaps Programming Mode, Hex 6, Hex B, Hex A, Hex 4, Save and Reset
1 overlap Programming Mode, Hex 6, Hex B, Hex A, Hex 1, Save and Reset
2 overlaps Programming Mode, Hex 6, Hex B, Hex A, Hex 2, Save and Reset
Number of Codabar Scans Required
25326
Selection Programming Tag Sequence
Programming Mode, Hex 6, Hex B, Hex 6, Hex 3, Save and Reset3 scans
4 scans Programming Mode, Hex 6, Hex B, Hex 6, Hex 4, Save and Reset
1 scan Programming Mode, Hex 6, Hex B, Hex 6, Hex 1, Save and Reset
2 scans Programming Mode, Hex 6, Hex B, Hex 6, Hex 2, Save and Reset
Setting
Default
Number of Coupon Scans Required
24462
Selection Programming Tag Sequence
Programming Mode, Hex 6, Hex B, Hex 0, Hex 2, Save and Reset2 scans
3 scans Programming Mode, Hex 6, Hex B, Hex 0, Hex 3, Save and Reset
4 scans Programming Mode, Hex 6, Hex B, Hex 0, Hex 4, Save and Reset
5 scans Programming Mode, Hex 6, Hex B, Hex 0, Hex 5, Save and Reset
10 scans Programming Mode, Hex 6, Hex B, Hex 0, Hex A, Save and Reset
12 scans Programming Mode, Hex 6, Hex B, Hex 0, Hex C, Save and Reset
13 scans Programming Mode, Hex 6, Hex B, Hex 0, Hex D, Save and Reset
11 scans Programming Mode, Hex 6, Hex B, Hex 0, Hex B, Save and Reset
0 scan Programming Mode, Hex 6, Hex B, Hex 0, Hex 0, Save and Reset
1 scan Programming Mode, Hex 6, Hex B, Hex 0, Hex 1, Save and Reset
6 scans Programming Mode, Hex 6, Hex B, Hex 0, Hex 6, Save and Reset
7 scans Programming Mode, Hex 6, Hex B, Hex 0, Hex 7, Save and Reset
8 scans Programming Mode, Hex 6, Hex B, Hex 0, Hex 8, Save and Reset
9 scans Programming Mode, Hex 6, Hex B, Hex 0, Hex 9, Save and Reset
14 scans Programming Mode, Hex 6, Hex B, Hex 0, Hex E, Save and Reset
15 scans Programming Mode, Hex 6, Hex B, Hex 0, Hex F, Save and Reset

NCR RealPOS Specifications

General

Scanning Technology	Laser
Interface	RS-232, USB
Supported Barcodes	UPC/EAN, Code 39, Code 128, Interleaved 2 of 5, Codabar, MSI, Code 93
Storage Temperature	-40° to 70° C (-40° to 158° F)
Humidity	5% to 95% (non-condensing)