Security Scale Counter Top 3
Installation Procedure
The Counter Top Security Scale can be anchored to the counter top to secure the scale.
If the scale will be anchored to the counter top, refer to the "Bolting the Security Scale on
page5" section in this instruction sheet and perform the procedure. If not, perform the
steps below to install the scale.
1. Position the scale in its installation location.
2. Adjust the leveling mounts (4) as necessary until the scale is level.
3. Route the Scale USBCable into the Kiosk Cabinet through the rear access hole.
To Next Page
Loading...
Need help?
General
