Ncredible AX1 - Pairing with a Second Device; Troubleshooting Pairing a Second Device

4 5
PAIRING WITH A SECOND DEVICE
Lets say you’re using your phone and your laptop and don’t want
to use the speaker for sound. When you pair both those devices
to your NCredible AX1, you experience the following situation: If
a call comes in on your phone while you’re watching a movie on
your laptop, the NCredible AX1 Bluetooth connection will pause
the movie and connect to the phone call automatically.
1. To connect your headphones with a second device, turn off
Bluetooth on the rst device.
2. Press and hold down MFB button to re-activate
Bluetooth Pairing Mode.
3. Repeat the original Connecting/Bluetooth Pairing -
from above.
4. Reconnect the rst device by selecting “NCredible AX1” from
the Bluetooth list of devices.
TROUBLESHOOTING PAIRING A SECOND DEVICE
If going back to the rst device isn’t working after pairing the
second device, you may need to adjust your Bluetooth settings
for the rst device.
1. Open Bluetooth and make sure it is turned ON.
2. Select "NCredible AX1" Headphones.
3. FOR ANDROID USERS, make sure the Call Audio
and Media Audio buttons are ON.
ENGLISH
ENGLISH