The New Direction Tackle TH9s Anti-Theft Alarm is a versatile security device designed to integrate with various New Direction Tackle products, including the R9s Receiver, B10 Smart Bite Watch, Smart Band B9, H9pro Headtorch, H10 Headtorch, Bivvy Light, and Air Light Sounder (ALS). This manual outlines the registration process for each compatible device, ensuring seamless operation and enhanced security for your fishing gear.
TH9s Anti-Theft Alarm (Main Unit) Features:
- Power On/Off (T1): A three-position switch controls the device's power and mode.
- Left: Remote control mode (Silent mode).
- Middle: OFF.
- Right: Remote control mode.
- Infrared Sensor (T2): Detects movement or presence, triggering the alarm function.
- LEDs (T3): Visual indicators for various statuses.
- Halo for Low Power (T4): Provides a visual alert when the battery is low.
- Turn On/Off LEDs (T5): Allows users to control the LED indicators. Holding this button also activates/deactivates the anti-theft function.
- Battery (T6): Powered by two CR2 batteries.
- High Quality Cone Speaker (T7): Emits audible alarms.
Registration with R9s Receiver:
The R9s Receiver acts as a central hub for the TH9s Anti-Theft Alarm. To register the TH9s with the R9s Receiver:
- Turn on the R9s Receiver.
- Enter System Menu: Press and hold the multi-function button on the receiver.
- Select "Register Alarm": Scroll down and choose this option from the menu.
- Choose an A-EFT Channel: Select one of the available A-EFT channels (A-EFT CHA1 to A-EFT CHA4). It is recommended to start with A-EFT CHA1. Press the button down to select.
- Turn on the TH9s Anti-Theft Alarm.
- Activate Registration on TH9s: Press the right button on the TH9s twice.
- Confirmation: The R9s display will show "SUCCESS" upon successful registration.
Registration with B10 Smart Bite Watch:
The B10 Smart Bite Watch offers a convenient way to receive anti-theft alerts directly on your wrist. To register the TH9s with the B10 Smart Bite Watch:
- Turn on the B10 Smart Bite Watch.
- Enter System Menu: Press the menu button on the watch down and hold it.
- Select "Register Alarm": Scroll down and choose this option.
- Choose an A-EFT Channel: Select one of the available A-EFT channels (A-EFT CHA1 to A-EFT CHA4). It is recommended to start with A-EFT CHA1. Press the button down to select.
- Turn on the TH9s Anti-Theft Alarm.
- Activate Registration on TH9s: Press the right button on the TH9s twice.
- Confirmation: The watch display will show "SUCCESS" upon successful registration.
Registration with Smart Band B9:
The Smart Band B9 provides discreet vibration alerts for anti-theft events. To register the TH9s with the Smart Band B9:
- Turn on the Smart Band B9: Press and hold the button for a few seconds.
- Turn on the TH9s Anti-Theft Alarm.
- Activate Register Mode on TH9s: Press the button on the TH9s twice. The LED will flash red.
- Switch Channels: Press the button on the TH9s once briefly to cycle through channels until the purple LED flashes. The purple channel is designated for anti-theft.
- Confirm Channel Selection: When the purple LED flashes, press and hold the button for 3 seconds until the LED lights up continuously.
- Finalize Registration on TH9s: Press the button on the TH9s twice.
- Confirmation: The LED lights up again, and the band vibrates, indicating successful registration.
Registration with H9pro Headtorch (Wireless Version):
The H9pro Headtorch (wireless version) can integrate with the TH9s for enhanced security during night fishing. To register the TH9s with the H9pro Headtorch:
- Turn on the H9pro.
- Turn on the TH9s Anti-Theft Alarm.
- Enter Register Mode on H9pro: Press the button on the H9pro three times. The LED on the H9pro will flash.
- Activate Registration on TH9s: Press the right button on the TH9s twice.
- Confirmation: The LED on the H9pro lights up, indicating successful registration.
Registration with H10 Headtorch:
The H10 Headtorch also offers anti-theft integration with the TH9s. To register the TH9s with the H10 Headtorch:
- Turn on the H10 Headtorch.
- Turn on the TH9s Anti-Theft Alarm.
- Enter Register Mode on H10: Press and hold both buttons on the H10 down for 5 seconds. The LED on the headtorch will flash.
- Activate Registration on TH9s: Press the right button on the TH9s twice.
- Confirmation: The LED on the H10 lights up, indicating successful registration.
Registration with Bivvy Light:
The Bivvy Light can be linked to the TH9s to provide visual alerts in your bivvy. To register the TH9s with the Bivvy Light:
- Turn on the Bivvy Light.
- Turn on the TH9s Anti-Theft Alarm.
- Activate Register Mode on Bivvy Light: Double-click the button on the bivvy light. The light will flash red.
- Select Purple Channel: The flashing color indicates the channel. Click the button to switch channels until the purple channel is selected. The purple channel is the anti-theft channel.
- Confirm Channel Selection: As soon as the Bivvy Light flashes purple, press the button on the TH9s Anti-Theft Alarm.
- Confirmation: The light will briefly flash, indicating successful registration.
Registration with Air Light Sounder (ALS):
The Air Light Sounder (ALS) can be paired with the TH9s to provide audible alerts. To register the TH9s with the ALS:
- Turn on the ALS.
- Turn on the TH9s Anti-Theft Alarm.
- Enter Register Mode on ALS: Long press the M button on the ALS until you hear a tone. The LED on the ALS will flash red.
- Activate Registration on TH9s: Press the button on the TH9s twice.
- Confirmation: The RED LED on the ALS lights up, indicating successful registration.
This comprehensive integration across various New Direction Tackle devices ensures that your fishing equipment is monitored and protected, providing peace of mind during your angling sessions.
Need help?
To Next Page
General