With voltage between 8V and 10.5V, a current
between 1A and 2A will be delivered, every 5
seconds. Timeout 4 hours.
With voltage between 10.5V and 12.0V, an
approximately 2A costant current will be
delivered. Timeout 8 hours.
With voltage between 12V and Vmax
(Maximum voltage of the selected charging
curve), will be delivered a constant current of:
20A model SCE 320 and 25A model SCE 360.
NOTE
• The default setting is Curve 1 for GEL batteries - desulphation
OFF.
• In order to safeguard the battery, with an ambient temperature
below 0°C, the LiFePO
4
charge curve will not be started.
To Next Page
Loading...
