NDS TEMPRA TBL 100 User Manual

13.OPERATION
Charge the battery completely before using it to its full
potential.
ACTIVATION
The default setting of the TEMPRA lithium battery is in
inactive mode: there is no voltage at the poles and to
use it you must activate and switch it on.
To activate it, move upward the No. 6 Dip switch
selector (ON position) (Fig. 2 - Ref. L), and to turn it on,
press and hold the ON/OFF button (Fig. 2 - Ref. G) for at
least 1 second.
The battery will be active when the LED indicator (Fig. 1
- Ref. C) lights up.
SHUTDOWN
The battery can be switched off in 4 different ways
according to requirements:
•
ON/OFF Button (Fig.2 - Ref. G).
•
Display NDS DTB01 button.
•
NDS ENERGY APP Mobile button (per iOS e
Android)
•
Dip switch (Fig. 2 - Ref. L) selector No. 6 “ON/OFF”
SWITCH-OFF WITH ON/OFF BUTTON (Fig.2 - Ref. G)
Turning the battery off using the ON/OFF button allows
you to choose whether to leave Bluetooth active or to
proceed to a complete shutdown.
With Bluetooth on, it is possible to turn the battery
back on via the NDS ENERGY APP, without pressing
the ON/OFF button again. In both cases there is no
voltage at the poles.
14

NDS TEMPRA TBL 100 Specifications

General

Brand	NDS
Model	TEMPRA TBL 100
Category	Camera Accessories
Language	English