NDS TEMPRA TBL 100 User Manual

5. INSTALLATION
Use insulated tools, do not place and/or leave metal
objects near the product to avoid contact between the
two poles (positive and negative) of the TEMPRA
Battery.
1. Place the TEMPRA battery on a horizontal surface by
resting it on the base, with the poles facing upwards.
The TEMPRA battery cannot be installed in all
positions or on all sides. See the pictures below.
2. If possible, secure the battery to the floor so as to
avoid unexpected movements during the journey.
3. Connect the negative (Fig.1 - Ref. A) and positive
(Fig.1 - Ref. B) terminals to the system. The terminals
have an M8 screw hole (head 13mm), use M8
Terminals Bolt Hole and cables of suitable cross
section.
4. Once the connections have been made, place the
plastic pole covers on them.
If necessary, customize the shape of the pole covers
to suit your needs and space requirements.
8
CAUTION
• Do not connect any different lithium batteries to the
TEMPRA. Don’t use: different brand, different lithium
technology, different capacity or voltage).
• Do not connect TEMPRA lithium batteries in series.
• Use only NDS TEMPRA batteries for parallel connection, do
not use batteries of other technology Lithium or Lead/Acid
batteries (AGM, Gel, Flooded).

NDS TEMPRA TBL 100 Specifications

General

Brand	NDS
Model	TEMPRA TBL 100
Category	Camera Accessories
Language	English