6
Place the rounded side of your Neato robot
against the metal charging contacts on the
charge base.
NOTE
The robot wakes up in two steps
1) The Lights turn on in about 5 seconds and
2) The LCD turns on about 15 seconds later.
Before using for the first time, charge your
Neato robot fully until both robot status lights
are solid white and the battery indicator
shows green.
Always make sure Neato is on its charge base
when finished cleaning.
Find your language using buttons.
Press SELECT to choose a language.
To change language later, go to Main Menu,
SELECT Settings, Language, and then choose
your language.
4 Charge Robot 5 Choose Your Language
Preparation and Set Up
(continued)
Charging
Contacts
Set Language
Dansk
English
Suomi
Dutch
To Next Page
Loading...
