MAINTAINING YOUR NEATO
IMPORTANT! Your robot needs regular
maintenance to operate reliably.
Dirt Bin and Filters
• After each use, empty the dirt bin
and clean the filter and airways/
openings.
• Replace the filter in the dirt bin
every one to two months.
Sensors
• Use a dry cotton swab to clean the
two drop sensor windows on the
bottom of the robot.
• Clean the top of the robot and the
area around the laser top
with a damp
cotton cloth.
Brushes
• Remove the guard over the brush
by pulling up on both sides.
PULL UP ON
BOTH SIDES
SIMULTANEOUSLY
• Remove hair and dirt from the
brush and brush ends.
• Replace the brush and the guard
over the brush.
REGISTERING YOUR ROBOT
AND GETTING HELP
Visit www.neatorobotics.com
• Register your Neato to stay up
to date on software releases and
special oers.
• Find more helpful information,
including frequently asked
questions, and tips and tricks
for optimal operation.
WARRANTY
Visit www.neatorobotics.com
for warranty information.
GETTING STARTED • English PAGE 4
To Next Page
Loading...
Need help?
General
