Issue 2 December 1995 6-7
Administering the System Translation Screen
Administering the System Translation
Screen
Use the following procedure to administer the System Translation screen.
1. Starting at the INTUITY Administration menu, shown in Figure 6-1., select
the following series of menu options:
After you select the System Translation option, you see the System
Translation screen as shown in Figure 6-5.
Figure 6-5. System Translation Screen
2. Use Table 6-2 to enter the correct values in each field on the Switch Link
Administration screen.
> System Translation
> Switch Interface Administration
To Next Page
Loading...
