NEC AccuSync LCD72VM - Page 70

4-18
RGB Adjust
Adjust 3 colors (Red, Green, Blue) independently. Control range (BAR): 0% to 100% (each color) Default
Setting: 100%
Color Red(Icon select) Color Red (adjust)
1. During Color Red function operate, Color Red Icon and slide bar color is changed from Normal
condition.
2. “-”Value decrease (Red gain decrease)
3.”+” Value increase (Red gain increase)
4. At exiting from this state, adjusted value is saved to EEPROM.
Color Red (Icon select)
Reset: Color select / User R, G, B
Color Green (Icon select) Color Green (adjust)
1.During Color Green function operate, Color Green Icon and slide bar color is changed from Normal
condition.
2. “-”Value decrease (Green gain decrease)
3. ”+” Value increase (Green gain increase)